JCB 8060 Midi
| STATIC DIMENSIONS |
| Machine Model | 8060 | ||
| Dipper size | mm (ft-in) | 1500 (4-11) | 1900 (6-3) |
| A Max dig height | mm (ft-in) | 5437 (18) | 5679 (18-10 ) |
| B Max dump height | mm (ft-in) | 3750 (12-4) | 3988 (13-1) |
| C Max vertical dig depth | mm (ft-in) | 2132 (7) | 2486 (8-2) |
| D Max dig depth-dozer up | mm (ft-in) | 3733 (12-2) | 4133 (13-7) |
| E Max ground level reach | mm (ft-in) | 5790 (19-0) | 6182 (20-3) |
| Bucket Rotation | degrees | 201° | |
| F Dozer cut above ground | mm (ft-in) | 432 (1-5) | |
| G Dozer cut below ground | mm (ft-in) | 505 (1-8) | |
| H Overall height (trans pos) | mm (ft-in) | 2662 (8-9) | |
| I Overall length (trans pos) | mm (ft-in) | 4808 (15-9) | |
| J Kingspost clearance | mm (ft-in) | 642 (2-1) | |
| K sprocket idler centres (Rubber) | mm (ft-in) | 1991 (6-6) | |
| K sprocket idler centres (Steel) | mm (ft-in) | 2006 (6-7) | |
| L Under carriage length (Rubber) | mm (ft-in) | 2516 (8-3) | |
| L Under carriage length (Steel) | mm (ft-in) | 2531 (8-4) | |
| M Tailswing | mm (ft-in) | 1300 (4-3) | |
| N Dozer Height | mm (ft-in) | 411 (1-4) | |
| O Dozer width | mm (ft-in) | 2020 (6-8) | |
| P Min. Slew radius (no bucket) | mm (ft-in) | 2021 (6-8) | |
| Q Superstructure width | mm (ft-in) | 1800 (5-11) | |
| R Width over tracks | mm (ft-in) | 2000 (6-7) | |
| S Boom swing left | degrees | 70° | |
| T Boom swing right | degrees | 50° | |
| Min slew radius (no offset) | 2443 | ||
| Max Bucket tearout (3CX bucket) (SAE J1179) | kN | 40.7 | |
| Max bucket tearout (8052 bucket) (SAE J1179) | kN | 47.9 | |
| Max dipper tearout (SAE J1179) 1500mm | kN | 32.4 | |
| Max dipper tearout (SAEJ1179) 1900mm | kN | 26.3 | |
| Travel speeds kph 1st gear | kph (mph) | 2.5 (1.56) | |
| Travel speeds kph 2nd gear | kph (mph) | 4.4 (2.7) | |
| Slew speed | rpm | 9.4 | |
